Arm/Leg Retainer – Gel Pads

• Specifications
• Technical data
• Instructions for use

• The Gel Arm and Leg Retainer Pads offers both pressure relieving properties and a durable high performance product while protecting vulnerable parts of the arm from pressure ulcers.

  The gel is made from polyurethane to avoid splitting and has a tough, yet effective outer skin.

  MG/115 5″(127mm) Gel Pad with pocket for Arm Retainer – AA/005
  MG/116 8″(203mm) Gel Pad with pocket for Arm Retainer – AA/008, AA/008S and AA/008J
  MG/141 9″(229mm) Gel Pad with pocket for Arm/Leg Retainer – AA/009
  MG/125 Made bespoke for wider Arm Retainers – AA/013 (size to be specified)

• Inner polyurethane gel compound with a 3 link multi-stetch additive.

  Outer polyurethane 14thou cover to prevent tearing while giving optimal pressure relief.
  The gel pad is covered in a wipe clean, multi-stretch, vapour-permeable cover, offering extra comfort.

  Fire Retardancy: Crib 5, Ignition Source 0

  Cleaning : Clean with 0.1% Hypo Chlorite solution and warm water, ensure the product is dried
  thoroughly prior to use.
  Medical wipes can also be used.

• Ensure the correct size Arm/Leg Retainer has been selected for the gel pad.

  Slide the pocket over the Arm Retainer so that the gel side is facing inwards towards the patient.

  Slide the base of the Arm Retainer between the operating table and the operating table mattress, or between the mattress and the patient, to retain the arm in place next to the body.